MapFactor Forum

lubos

then I have no idea, the message should be there for at least one minute after crash happens

Jan_Gruuthuse

MapFactor Navigator 3.0.113
device: Galaxy Tab S2, SM-T810 9.7'' , (gts210wifixx)
Chipset: EXYNOS5433
GPU/Renderer: Mali-T760
Resolution: 1536x2048
____________________________________
OS: Nougat (7.0)
Current version: T810XXU2DQCL/T810PHN2DQD2
OpenGL version: OpenGL ES 3.2
kernel: 3.10.9-10949424
____________________________________
Map renderer: Hardware (experimental)
Navigation map mode: 2D while simulating (speed x )
device in portrait mode

Vehicule Parameters:
Maximum speed 55.9 mph
Unit system: Imperial (British)
Optimisation Mode: Fastest

Road Restrictions:
* 60 Motorway
* 50 Primary Road
* 50 Major Road
* 40 Secondary Road
* 30 Local Connecting Road
* 20 Local road Of high Importance
* 15 Local Road
* 10 Small Local Road
only these are selected, all others are off

Earth osm 44-201608040
Map UK 44-201704280

Departure Dover, CT16 1JA        lat:184061632 lon:4799552
Waypoint: M42 from Dover        lat:188453530 lon:-6506942
Waypoint: M56 from Dover        lat:192061750 lon:-9034454
Destination: Holyhead, Llanfawr road    lat:191905868 lon:-16669312

Closed unexpectedly while simulating

SM-T810-Nougat-Dover-Hollyhead-mapfactor3.0.113.zip:
Download link https://we.tl/1GSwspm7NV
1 file, 285 KB in total ・ Will be deleted on 31 May, 2017

Jan_Gruuthuse

Strangely enough s5neo android 6.0.1 seems to be working:

Jan_Gruuthuse

Dover > Holyhead

Run Completed

MapFactor Navigator 3.0.113
device: Galaxy S5 Neo, SM-G903F 5.1'', (s5neoltexx)
Chipset: EXYNOS7580
GPU/Renderer: Mali-T720
Resolution: 1080x1920 (Full HD)
____________________________________
OS: Marshmallow (6.0.1)
Current version: G903FXXU1BQC1 / G903FLUX1BQC1 / G903FXXU1BQC1
OpenGL version: OpenGL ES 3.2
kernel: 3.10.61-10798689
____________________________________
Map renderer: Hardware (experimental)
Navigation map mode: 2D while simulating (speed x )
device in portrait mode

Jan_Gruuthuse

I've read:
"LogCat protocol changed. adb and Android Studio work with both protocols. But, since the ADT Plugin is no longer maintained, it does not work with the new LogCat protocol"

lubos

That must be new with Android 7, with Android 6 it works with Eclipse... thank you for information

I uploaded on http://download.mapfactor.com/mapfactor_navigator.apk version 3.0.114+ where is attempt to fix reported crash.

Jan_Gruuthuse

Sorry for late reply
Current situation: Android Studio 2.3.2 => Android Monitor => DDMS is included.
still figuring out how to get it working.

Android Studio 2.3.2 Menu: Tools: Android: Android Device Monitor:

New window starts with: Android device Monitor
click [DDMS] buton

source: https://developer.android.com/studio/profile/ddms.html

Think then your cppstack.pdf doc can be followed.

Jan_Gruuthuse

apk is size 0 bytes
playstore updated to : MapFactor Navigator 3.0.115

device: Galaxy Tab S2, SM-T810 9.7'', (gts210wifixx)
Map renderer: Hardware (experimental)
Dover > Holyhead: 1st Run Completed
Holyhead > Dover: 1st Run Completed

lubos

ok, thank you for report

Jan_Gruuthuse

MapFactor Navigator 3.0.115
Map UK 44-201705120
device: Galaxy Tab S2, SM-T810 9.7'', (gts210wifixx)
Map renderer: Hardware (experimental)
Dover > Holyhead: 1st Run Completed
Holyhead > Dover: 1st Run Completed
2D and 3D

MacDony

Hello,
When I move a step, the old location remains empty and another empty location is created below the new position.

Version 3.0.115

Jan_Gruuthuse

MapFactor Navigator 3.0.123
device: Galaxy Tab S2, SM-T810 9.7'', (gts210wifixx)
Chipset: EXYNOS5433
GPU/Renderer: Mali-T760
____________________________________
OS: Nougat (7.0), API 24
Current version: T810XXU2DQCL/T810PHN2DQD2
OpenGL version: OpenGL ES 3.2
kernel: 3.10.9-10949424
____________________________________
Map renderer: Hardware (experimental)
Navigation map mode: 2D while simulating (speed x )
device in portrait mode

Vehicule Parameters:
Maximum speed 55.9 mph
Unit system: Imperial (British)
Optimisation Mode: Fastest

Road Restrictions:
* 60 Motorway
* 50 Primary Road
* 50 Major Road
* 40 Secondary Road
* 30 Local Connecting Road
* 20 Local road Of high Importance
* 15 Local Road
* 10 Small Local Road
only these are selected, all others are off

Earth osm 44-201608040
Map UK 44-201705120

Departure Dover, CT16 1JA        lat:184061632 lon:4799552
Waypoint: M42 from Dover        lat:188453530 lon:-6506942
Waypoint: M56 from Dover        lat:192061750 lon:-9034454
Destination: Holyhead, Llanfawr road    lat:191905868 lon:-16669312

At some point, 158 mls from destination
- navigator continues
- the route is erased (list)
- upcoming road change, bottom left big icon, hangs at 0.0 yards no direction showing
- bottom panels are frozen
- passed route isn't cleaned up, stays purple

navigator_170608_170953.log.txt.zip 1 file, 453 KB in total
Will be deleted on 15 June, 2017
Download link https://we.tl/NVJv5a11Sg

stavrich

Toolbar responsiveness

I noticed that Toolbar is not appearing immediately and sometimes not at all while in navigation mode.

Also, in simulation mode, the Toolbar is not available while in navigation screen but available in route review modes ie show whole journey and not in centering.

I will appreciate it if some of you have a quick check - just to confirm is not just me.

chattiewoman

My vehicle profile was set to pedestrian and I started "Navigate". Right after, I remembered that I need to switch it to car, thus I set it to car. This recalculated the route automatically (the values were now correct).
However, when I started to drive, navigator warned me that vehicle profile would be pedestrian.
Please fix

stavrich

Re: Toolbar Responsiveness

Has anybody had a go?

It's an important function to me and I would like to see it working perfectly.

aryavritindia

Then updated version is good.

stavrich

Toolbar responsiveness.

I have tested the issue on Samsung galaxy s3 and has the same behavior.

This is not right. Please investigate and fix.

http://forum.mapfactor.com/discussion/comment/14986#Comment_14986

lubos

@stavrich - Toolbar does not work in simulation because few function wont work there and we do not want to make extra toolbar into simulation mode. It also does not working in map mode when centering is on (it is requied to have stable map position during toolbar)

Garfield

I still have wrong turn calculation mentioned in post #Comment_14458 in version 3.0.123
Can anyone confirm this?
Please try to navigate this route with bike: http://www.openstreetmap.org/directions?engine=graphhopper_bicycle&route=53.7092,9.7170;53.7244,9.7110

tomas

are you by any chance complaining about not hearing turn right when near Grenzweg?
manouvres are not announced when there is no alternative

stavrich

@lubos - thanks Lubos, I can see the logic behind that but my main concern is the responsiveness while on navigation mode. The Toolbar is too slow to appear and sometimes it does not appears.

While on motorbike a quick response is essential, in my case is to delete/clear a missed waypoint.

Please try to bring the Toolbar up while navigating and you will see what I mean - I don't think is down to my devices but hey I have been wrong before :-)

lubos

@stavrich - I checked it more and I found that in SW renderer it can take it longer because of locked access to our engine backend. I fixed it in development version 3.1.11 (currently not public)

@chattiewoman - Thank you for report, the code for this message did not expect vehicle change during navigating, I fixed it in development version 3.1.11 (currently not public)

@Garfield - This is known issue, fixing this would mean a big change of Navigator engine and we currently dont have capacities to do it.

stavrich

@lubos - you are a star! I will be looking forward to 3.1.11. Many thanks!

lubos

We agreed to put both fixes into 3.0.125+ version, it will be on beta before this weekend.

Jan_Gruuthuse

Dover > Holyhead: Run Completed
Holyhead > Dover: Run Completed

MapFactor Navigator 3.0.125
device: Galaxy Tab S2, SM-T810 9.7'', (gts210wifixx)
Chipset: EXYNOS5433
GPU/Renderer: Mali-T760
____________________________________
OS: Nougat (7.0), API 24
Current version: T810XXU2DQCL/T810PHN2DQD2
OpenGL version: OpenGL ES 3.2
kernel: 3.10.9-10949424
____________________________________
Map renderer: Hardware (experimental)
Navigation map mode: 2D while simulating (speed x )
device in portrait mode

stavrich

Touring in Spain and and got a few turnings wrong ( my mistake) and I think the reason is that the Autozoom is not working. I ticked on and off but no luck.
Can somebody check theirs and let me know.

Garfield

@lubos thank you for giving me that feedback. So we need to wait until it is fixed.

@tomas: it is not only about missing voice message but about missing and misleading turn instructions, e.g. telling me do drive straight on where one can only turn right or left. The visible route on the map definitely turns right. At the next turn there is no instruction instead of telling to turn left.

stavrich

@lubos - this is to confirm that Toolbar pops up promptly - well done, Many thanks.

Issue with Autozoom - it does not zoom in when at slow speed, such as a roundabout as it used to - can you have a quick look please.

tomas

@Garfield I think you misunderstand my comment
yes turn is right, but, because you cannot go anywhere else, it is not considered as manoeuvre, so it is not announced - next one is, which may confuse you
you can go to itinerary and disply manoeuvres on the map

Roldorf

@stavrich Autozoom hasn't worked for some time.

stavrich

@Roldorf Thanks for confirming - we need it back especially zooming in at roundabouts and at very slow speeds.

@lubos - I think it needs to be fixed - touring in unknown towns it's very easy to miss turnings which are very close to each other.

stavrich

Autozoom

@tomas @Lubos - Have you assigned the Autozoom issue to somebody to look at? It should be classified as a fault.

tomas

I have no problem with autozoom

lubos

@stavrich - I cannot reproduce the problem. Autozoom is temporarly disabled when user touches screen, I am not sure if your issue is not connected with it.

stavrich

@lubos - please correct me if I am wrong. I think there are three zooms when Autozoom is ticked.

Maximum Zoom Out when travelling at high speed

Medium Zoom - or standard zoom - at lower speed

High Zoom In at low speed and when at roundabouts

I get the Max and medium magnifications but not the High Zoom In as I am sure I used to.

Maximum Zoom Out

Medium - Normal magnification

These should have been Zoomed IN - but are same as Normal

tomas

I think you are confusing autozoom with overview
three-mode button (bottom right in navigation view) gives you overview of part of route, then overview of the whole route and then it goes back to navigation
it is not dependent on speed

stavrich

@tomas - No, I am not confusing the autozoom with overview.

Screenshot 1 zoom level is different from screenshot 2 and both are in navigation mode. You can see very clearly that in screenshot 1 the highlighted route line is narrower when in maximum zoom out. Also the road is narrower - less magnification. Both screenshots are of the same road and the difference is one is 3km before and the speed.

So, travelling at 92km/h had the highest zoom out. Then slowed down when approaching the village to 47km/h the mapzoom changed - zoomed in.

I am missing the 3rd zoom in when approaching a roundabout or junction. I expect screenshot 3 & 4 to shown a high zoom in of the roundabouts but the mapzoom remain the same as in screenshot 2.

If the Autozoom is unticked then one constant magnification is used, just the normal as in screenshot 2

How many autozoom levels do you get when in navigation mode?

Just found this in the user guide

" Tap Autozoom to toggle the Autozoom feature on or off. Autozoom will automatically adjust the mapzoom as your drive, zooming out when between manoeuvres and zooming in as you approach the next junction. "

stavrich

V. 3.1.11

POI types - clicking on Administration crashes mapfactor.

Other types work fine

chattiewoman

@stavrich wrong topic for that version ;-)

stavrich

@chattiewoman - thanks. Found the 3.1. thread and the POI issue reported already -- late again :)

I hope the autozoom has been sorted out on 3.1 - will try to test later on but if not I'll will be copying my post over to 3.1

:)

lubos

@stavrich - according to code there are only two levels of autozoom - detail and overview... detail zoom is choosen when gps arrow is close to green arrow. This should check @stepan, I have no clue about it.

MapFactor Forum

Howdy, Stranger!

Categories

In this Discussion