Test of Android version 3.0.x
  • 341 Comments sorted by
  • Vote Up0Vote Down luboslubos
    then I have no idea, the message should be there for at least one minute after crash happens
  • Vote Up0Vote Down Jan_GruuthuseJan_Gruuthuse
    MapFactor Navigator 3.0.113
    device: Galaxy Tab S2, SM-T810 9.7'' ,  (gts210wifixx)
    Chipset: EXYNOS5433
    GPU/Renderer: Mali-T760
    Resolution: 1536x2048
    ____________________________________
    OS: Nougat (7.0)
    Current version: T810XXU2DQCL/T810PHN2DQD2
    OpenGL version: OpenGL ES 3.2
    kernel: 3.10.9-10949424
    ____________________________________
    Map renderer: Hardware (experimental)
    Navigation map mode: 2D while simulating (speed x )
    device in portrait mode

    Vehicule Parameters:
    Maximum speed 55.9 mph
    Unit system: Imperial (British)
    Optimisation Mode: Fastest

    Road Restrictions:
    * 60 Motorway                     
    * 50 Primary Road                 
    * 50 Major Road                   
    * 40 Secondary Road               
    * 30 Local Connecting Road        
    * 20 Local road Of high Importance
    * 15 Local Road
    * 10 Small Local Road                                       
    only these are selected, all others are off

    Earth osm 44-201608040
    Map UK 44-201704280

    Departure Dover, CT16 1JA        lat:184061632 lon:4799552
    Waypoint: M42 from Dover        lat:188453530 lon:-6506942
    Waypoint: M56 from Dover        lat:192061750 lon:-9034454
    Destination: Holyhead, Llanfawr road    lat:191905868 lon:-16669312

    Closed unexpectedly while simulating

    SM-T810-Nougat-Dover-Hollyhead-mapfactor3.0.113.zip:
    Download link https://we.tl/1GSwspm7NV
    1 file, 285 KB in total ・ Will be deleted on 31 May, 2017
  • Vote Up0Vote Down Jan_GruuthuseJan_Gruuthuse
    Strangely enough s5neo android 6.0.1 seems to be working:

    image
  • Vote Up0Vote Down Jan_GruuthuseJan_Gruuthuse
    Dover > Holyhead

    Run Completed

    MapFactor Navigator 3.0.113
    device: Galaxy S5 Neo, SM-G903F 5.1'', (s5neoltexx)
    Chipset: EXYNOS7580
    GPU/Renderer: Mali-T720
    Resolution: 1080x1920 (Full HD)
    ____________________________________
    OS: Marshmallow (6.0.1)
    Current version: G903FXXU1BQC1 / G903FLUX1BQC1 / G903FXXU1BQC1
    OpenGL version: OpenGL ES 3.2
    kernel: 3.10.61-10798689
    ____________________________________
    Map renderer: Hardware (experimental)
    Navigation map mode: 2D while simulating (speed x )
    device in portrait mode
  • Vote Up0Vote Down Jan_GruuthuseJan_Gruuthuse
    I've read:
    "LogCat protocol changed. adb and Android Studio work with both protocols. But, since the ADT Plugin is no longer maintained, it does not work with the new LogCat protocol"
  • Vote Up0Vote Down luboslubos
    That must be new with Android 7, with Android 6 it works with Eclipse... thank you for information

    I uploaded on http://download.mapfactor.com/mapfactor_navigator.apk version 3.0.114+ where is attempt to fix reported crash.
  • Vote Up0Vote Down Jan_GruuthuseJan_Gruuthuse
    Sorry for late reply
    Current situation: Android Studio 2.3.2 => Android Monitor => DDMS is included.
    still figuring out how to get it working.

    Android Studio 2.3.2 Menu: Tools: Android: Android Device Monitor:

    New window starts with: Android device Monitor
    click [DDMS] buton

    source: https://developer.android.com/studio/profile/ddms.html

    Think then your cppstack.pdf doc can be followed.


    image
  • Vote Up0Vote Down Jan_GruuthuseJan_Gruuthuse
    apk is size 0 bytes
    playstore updated to : MapFactor Navigator 3.0.115

    device: Galaxy Tab S2, SM-T810 9.7'',  (gts210wifixx)
    Map renderer: Hardware (experimental)
    Dover > Holyhead: 1st Run Completed
    Holyhead > Dover: 1st Run Completed
  • Vote Up0Vote Down luboslubos
    ok, thank you for report
  • Vote Up0Vote Down Jan_GruuthuseJan_Gruuthuse
    MapFactor Navigator 3.0.115
    Map UK 44-201705120
    device: Galaxy Tab S2, SM-T810 9.7'',  (gts210wifixx)
    Map renderer: Hardware (experimental)
    Dover > Holyhead: 1st Run Completed
    Holyhead > Dover: 1st Run Completed
    2D and 3D
  • Vote Up0Vote Down MacDonyMacDony
    Hello,
    When I move a step, the old location remains empty and another empty location is created below the new position.

    Version 3.0.115

    image
  • Vote Up0Vote Down Jan_GruuthuseJan_Gruuthuse
    MapFactor Navigator 3.0.123
    device: Galaxy Tab S2, SM-T810 9.7'', (gts210wifixx)
    Chipset: EXYNOS5433
    GPU/Renderer: Mali-T760
    ____________________________________
    OS: Nougat (7.0), API 24
    Current version: T810XXU2DQCL/T810PHN2DQD2
    OpenGL version: OpenGL ES 3.2
    kernel: 3.10.9-10949424
    ____________________________________
    Map renderer: Hardware (experimental)
    Navigation map mode: 2D while simulating (speed x )
    device in portrait mode

    Vehicule Parameters:
    Maximum speed 55.9 mph
    Unit system: Imperial (British)
    Optimisation Mode: Fastest

    Road Restrictions:
    * 60 Motorway                    
    * 50 Primary Road                
    * 50 Major Road                  
    * 40 Secondary Road              
    * 30 Local Connecting Road       
    * 20 Local road Of high Importance
    * 15 Local Road
    * 10 Small Local Road                                      
    only these are selected, all others are off

    Earth osm 44-201608040
    Map UK 44-201705120

    Departure Dover, CT16 1JA        lat:184061632 lon:4799552
    Waypoint: M42 from Dover        lat:188453530 lon:-6506942
    Waypoint: M56 from Dover        lat:192061750 lon:-9034454
    Destination: Holyhead, Llanfawr road    lat:191905868 lon:-16669312

    At some point, 158 mls from destination
    - navigator continues
    - the route is erased (list)
    - upcoming  road change, bottom left big icon, hangs at 0.0 yards no direction showing
    - bottom panels are frozen
    - passed route isn't cleaned up, stays purple

    navigator_170608_170953.log.txt.zip 1 file, 453 KB in total
    Will be deleted on 15 June, 2017
    Download link https://we.tl/NVJv5a11Sg

    image
  • Vote Up0Vote Down stavrichstavrich
    Toolbar responsiveness

    I noticed that Toolbar is not appearing immediately and sometimes not at all while in navigation mode.

    Also, in simulation mode, the Toolbar is not available while in navigation screen but available in route review modes ie show whole journey and not in centering.

    I will appreciate it if some of you have a quick check - just to confirm is not just me.
  • Vote Up0Vote Down chattiewomanchattiewoman
    My vehicle profile was set to pedestrian and I started "Navigate". Right after, I remembered that I need to switch it to car, thus I set it to car. This recalculated the route automatically (the values were now correct).
    However, when I started to drive, navigator warned me that vehicle profile would be pedestrian.
    Please fix
  • Vote Up0Vote Down stavrichstavrich
    Re: Toolbar Responsiveness

    Has anybody had a go?

    It's an important function to me and I would like to see it working perfectly.
  • Vote Up0Vote Down aryavritindiaaryavritindia
    Then updated version is good.
  • Vote Up0Vote Down stavrichstavrich
    Toolbar responsiveness.

    I have tested the issue on Samsung galaxy s3 and has the same behavior.

    This is not right. Please investigate and fix.


  • Vote Up0Vote Down luboslubos
    @stavrich - Toolbar does not work in simulation because few function wont work there and we do not want to make extra toolbar into simulation mode. It also does not working in map mode when centering is on (it is requied to have stable map position during toolbar)
  • Vote Up0Vote Down GarfieldGarfield
    I still have wrong turn calculation mentioned in post #Comment_14458 in version 3.0.123
    Can anyone confirm this?
    Please try to navigate this route with bike: http://www.openstreetmap.org/directions?engine=graphhopper_bicycle&route=53.7092,9.7170;53.7244,9.7110
  • Vote Up0Vote Down tomastomas
    are you by any chance complaining about not hearing turn right when near Grenzweg?
    manouvres are not announced when there is no alternative
  • Vote Up0Vote Down stavrichstavrich
    @lubos - thanks Lubos, I can see the logic behind that but my main concern is the responsiveness while on navigation mode. The Toolbar is too slow to appear and sometimes it does not appears.

    While on motorbike a quick response is essential, in my case is to delete/clear a missed waypoint.

    Please try to bring the Toolbar up while navigating and you will see what I mean - I don't think is down to my devices but hey I have been wrong before :-)

  • Vote Up0Vote Down luboslubos
    @stavrich - I checked it more and I found that in SW renderer it can take it longer because of locked access to our engine backend. I fixed it in development version 3.1.11 (currently not public)

    @chattiewoman - Thank you for report, the code for this message did not expect vehicle change during navigating, I fixed it in development version 3.1.11 (currently not public)

    @Garfield - This is known issue, fixing this would mean a big change of Navigator engine and we currently dont have capacities to do it.
  • Vote Up0Vote Down stavrichstavrich
    @lubos - you are a star! I will be looking forward to 3.1.11. Many thanks!
  • Vote Up0Vote Down luboslubos
    We agreed to put both fixes into 3.0.125+ version, it will be on beta before this weekend.
  • Vote Up0Vote Down Jan_GruuthuseJan_Gruuthuse
    Dover > Holyhead: Run Completed
    Holyhead > Dover: Run Completed

    MapFactor Navigator 3.0.125
    device: Galaxy Tab S2, SM-T810 9.7'', (gts210wifixx)
    Chipset: EXYNOS5433
    GPU/Renderer: Mali-T760
    ____________________________________
    OS: Nougat (7.0), API 24
    Current version: T810XXU2DQCL/T810PHN2DQD2
    OpenGL version: OpenGL ES 3.2
    kernel: 3.10.9-10949424
    ____________________________________
    Map renderer: Hardware (experimental)
    Navigation map mode: 2D while simulating (speed x )
    device in portrait mode
  • Vote Up0Vote Down stavrichstavrich
    Touring in Spain and and got a few turnings wrong ( my mistake) and I think the reason is that the Autozoom is not working. I ticked on and off but no luck.
    Can somebody check theirs and let me know.
  • Vote Up0Vote Down GarfieldGarfield
    @lubos thank you for giving me that feedback. So we need to wait until it is fixed.

    @tomas: it is not only about missing voice message but about missing and misleading turn instructions, e.g. telling me do drive straight on where one can only turn right or left. The visible route on the map definitely turns right. At the next turn there is no instruction instead of telling to turn left.
  • Vote Up0Vote Down stavrichstavrich
    @lubos - this is to confirm that Toolbar pops up promptly - well done, Many thanks.

    Issue with Autozoom - it does not zoom in when at slow speed, such as a roundabout as it used to - can you have a quick look please.
  • Vote Up0Vote Down tomastomas
    @Garfield I think you misunderstand my comment
    yes turn is right, but, because you cannot go anywhere else, it is not considered as manoeuvre, so it is not announced - next one is, which may confuse you
    you can go to itinerary and disply manoeuvres on the map
  • Vote Up0Vote Down RoldorfRoldorf
    @stavrich Autozoom hasn't worked for some time.
  • Vote Up0Vote Down stavrichstavrich
    @Roldorf Thanks for confirming - we need it back especially zooming in at roundabouts and at very slow speeds.

    @lubos - I think it needs to be fixed - touring in unknown towns it's very easy to miss turnings which are very close to each other.
  • Vote Up0Vote Down stavrichstavrich
    Autozoom

    @tomas @Lubos - Have you assigned the Autozoom issue to somebody to look at?  It should be classified as a fault.


  • Vote Up0Vote Down tomastomas
    I have no problem with autozoom
  • Vote Up0Vote Down luboslubos
    @stavrich - I cannot reproduce the problem. Autozoom is temporarly disabled when user touches screen, I am not sure if your issue is not connected with it.
  • Vote Up0Vote Down stavrichstavrich
    @lubos - please correct me if I am wrong. I think there are three zooms when Autozoom is ticked. 

    Maximum Zoom Out when travelling at high speed 
    Medium Zoom - or standard zoom - at lower speed 
    High Zoom In at low speed and when at roundabouts 

    I get the Max and medium magnifications but not the High Zoom In as I am sure I used to.


    Maximum Zoom Out
    image

    Medium - Normal magnification

    image



    These should have been Zoomed IN - but are same as Normal

    image

    image
  • Vote Up0Vote Down tomastomas
    I think you are confusing autozoom  with overview
    three-mode button (bottom right in navigation view) gives you overview of part of route, then overview of the whole route and then it goes back to navigation
    it is not dependent  on speed
  • Vote Up0Vote Down stavrichstavrich
    @tomas - No, I am not confusing  the autozoom with overview.

    Screenshot 1 zoom level is different from screenshot 2 and both are in navigation mode. You can see very clearly that in screenshot 1 the highlighted route line is narrower when in maximum zoom out. Also the road is narrower - less magnification. Both screenshots are of the same road and the difference is one is 3km before and the speed.

    So, travelling at  92km/h had the highest zoom out. Then slowed down when approaching the village to 47km/h the mapzoom changed - zoomed in. 

    I am missing the 3rd zoom in when approaching a roundabout or junction. I expect screenshot 3 & 4 to shown a high zoom in of the roundabouts but the mapzoom remain the same as in screenshot 2.

    If the Autozoom is unticked then one constant magnification is used, just the normal as in screenshot 2

    How many autozoom levels do you get when in navigation mode?

    Just found this in the user guide
    " Tap Autozoom to toggle the Autozoom feature on or off. Autozoom will automatically adjust the mapzoom as your drive, zooming out when between manoeuvres and zooming in as you approach the next junction. "
  • Vote Up0Vote Down stavrichstavrich
    V. 3.1.11

    POI types - clicking on Administration crashes mapfactor.

    Other types work fine
  • Vote Up0Vote Down chattiewomanchattiewoman
    @stavrich wrong topic for that version ;-)
  • Vote Up0Vote Down stavrichstavrich
    @chattiewoman - thanks. Found the 3.1. thread and the POI issue reported already -- late again :)

    I hope the autozoom has been sorted out on 3.1 - will try to test later on but if not I'll will be copying my post over to 3.1 
    :)
  • Vote Up0Vote Down luboslubos
    @stavrich - according to code there are only two levels of autozoom - detail and overview... detail zoom is choosen when gps arrow is close to green arrow. This should check @stepan, I have no clue about it.
Add a Comment

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Apply for Membership

Categories

In this Discussion