frisian

Garmin gdb file
@tomsan Depends probably on the RAM size and processor speed of the phone. On my PNA (WinCE) with 64 MB RAM routes with more than about 200 waypoints are difficult. So I would upload the single gpx file to motoplaner.de, work out the route and than…

Comment by frisian June 2015 permalink
Garmin gdb file
@tomsan84 With ITNConverter I had no problems converting Your gdb to gpx. The file contains 13 day routes and waypoints. So if You are using ITNCon convert every single day route to a gpx. I did it with Day 1 "Almere to Schwedenkai" and a…

Comment by frisian June 2015 permalink
Garmin gdb file
Hello, I just tried "ITNConverter" from here: http://www.benichou-software.com/It can convert all kinds of formats, also gdb to gpx or even to MFs xml so You could use this directly as "routing_points.xml" for routing. I'm …

Comment by frisian June 2015 permalink
Where do I put the mca file of my self generated POIs in PC Navigator 14?
Hello, I store mca-files created with digger in the folder with the maps. In my case: C:\Programme\Navigator14\PC_Navigator\config\map Regards

Comment by frisian May 2015 permalink
Installing Navigator Free on WinCE 5.0 device
Hello, could be also a problem with RAM-size. If all programs installed directly on PNA itself maybe change memory settings in system. I' running MF on WinCE 4.2 NET with 64 MB RAM and installed all my programs on SD. Regards

Comment by frisian May 2015 permalink
Installing Navigator Free on WinCE 5.0 device
Hello, maybe You'll find here : http://xania.123.fr/component/option,com_remository/Itemid,36/func,select/id,2/ the missing DLLs. Regards

Comment by frisian May 2015 permalink
Roundabout "Alte Werft", Papenburg
Hello, this roundabout 53 04 51.1 N, 7 22 42.9 E. Starting point "Rheiderlandstraße", end point "Flachsmeerer Straße" with car and routing option "cheapest" or "shortest". With PC-version I get the same misca…

Comment by frisian November 2014 permalink
Navigator free for Win CE (MIPS) (not ARM version)
Hello, I don't know if this program here: http://sourceforge.net/projects/navegis/?source=navbar or this: http://wiki.navit-project.org/index.php/Main_Page runs on your device. These application using map data from OSM and are also running on …

Comment by frisian November 2014 permalink
add POI category for Toilets
Hello, here: http://poiplaza.com/index.php?p=ds&s=478 you can download POIs catorogy for toilets in all kind of formats and import them.

Comment by frisian October 2014 permalink
Medion GoPal P4410
Hello,here :http://www.gopal-navigator.de/wiki/P_4410 you'll find a description in german for your P4410. There are also described two hardware ways to get on the windows desktop to open then windows explorer.

Comment by frisian October 2014 permalink
Medion GoPal P4410
Hello, maybe here: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=136798 you find a software solution to unlock your desktop. There should be also a hardware solution to open the task bar and then windows explorer. In the end all PNAs are als…

Comment by frisian October 2014 permalink
Navigator.exe missing
Might be also a problem with your antivirus program or Win-OS security settings not let you download a .exe file. The "pnd_app.rar" has 6.976 kb.

Comment by frisian July 2014 permalink
Navigator.exe missing
"Install" should be a subfolder in your folder Navigato 12 as well as folder "Data" containing the Navigator maps etc. and "Setup" and "Help". Don't choose the option "Setup the program" after d…

Comment by frisian July 2014 permalink
Navigator.exe missing
If you download CE-version with "setup utility" don't choose "setup the program". There should be a folder "Navigator" on your PC with a folder "Install" within it containing a zip-file "pnd_app"…

Comment by frisian July 2014 permalink
Navigator.exe missing
Here a instruction that I found in this forum for a WinCE device: "Thanks to Navigator Free, I was able to give a second live to my old Viamichelin X-970T GPS!Viamichelin stoped manufacturing GPS some years ago, and you cannot update the maps a…

Comment by frisian July 2014 permalink
Routing
That is a mistake in OSM and I have edit this.

Comment by frisian July 2014 permalink
Routing
In the moment I'm working in this area and had to find this adress (Jemgumer Weg 3). It isn't a oneway street, only a simple driveway part of the "Jemgumer Weg" leading to "Jemgumer Weg" No. 3 as dead end, that can be e…

Comment by frisian July 2014 permalink
Routing
The correct name is "Jemgumer Weg". That was a mistake in OSM. This part of the "Jemgumer Weg" is the driveway to No. 3, Jemgumer Weg and I can drive it in both directions. I already change this in OSM.

Comment by frisian July 2014 permalink
No access for uninstalling from Windows 8.1
Hello,try the free program from here: http://www.revouninstaller.com/revo_uninstaller_free_download.htmlIt shows all programs installed and You can uninstall the program You wish. In the the advanced mode also the registry entrys etc. will be delete…

Comment by frisian March 2014 permalink
Understanding some "Road restriction" parameters
Hello,there is a term "" in the settings.xml changing the value will increase the computing steps on mobile PNAs and so should make a better routing. I didn't try it yet so I don't know if it really works. In the end I anyway dou…

Comment by frisian February 2014 permalink
*** ~ Few Questions ~ ***
Hello,here: http://www.mapfactor.com/pn12/ You'll get the manuals for both the Android-OS and Windows-OS.They should give answers to Your questions. Regards

Comment by frisian February 2014 permalink
How to find Alternative Route with MapFactor ??Help
Hello, Galaxy Note has a Android OS. PC- and PDA/PNA-versions are for Windows. I'm using only MF for Windows.If the manual is of any use for the Android-version I don't know, but I presume that there is not much of a difference in how to p…

Comment by frisian January 2014 permalink
How to find Alternative Route with MapFactor ??Help
Hello,did You download the manual from here: http://www.mapfactor.com/pn11/. The routing modes have nothing to do with roads blocked or not. They only important to calculate a route between two or more points. Before You not planning the route befor…

Comment by frisian January 2014 permalink
How to find Alternative Route with MapFactor ??Help
Hello, before You can choose a certain route You have to plan and save this route. So set a start and destination and between enough waypoints/routingpoints that the calculated route is the route you want to travel. Save it with a name in "My r…

Comment by frisian January 2014 permalink
How to find Alternative Route with MapFactor ??Help
Hello,You can save a route that You are using on a regulary base in "My routes" and load the set when You need it. I You click on a road in the map You can then choose to block it for navigation in the pop-up-menu. Here: http://www.mapfact…

Comment by frisian January 2014 permalink
Passed Waypoint again in recalculated route
Hello, I did a route simulation on my PC-version with a couple of waypoints and noticed the same as with the Pocket-version, when I pass/arrive at a waypoint within a certain range (~ 50m) the colour of the waypoint-flag is changing from orange to g…

Comment by frisian January 2014 permalink
Passed Waypoint again in recalculated route
Hello, I'm using the WinCE-version. So far I did not had this problem when planning a route with waypoints. Did You actually "arrived" at the waypoint or only "passed" it. Because when Your GPS-position is exactly that of th…

Comment by frisian January 2014 permalink
Build-in GPS (Windows Tablet) doesn't work with Navigator
Hello, You could try this "Centrafuse Localizer 4" from here: http://www.centrafuse.com/us/centrafuse-localizerDownload 30-Days-Testversion: http://www.centrafuse.com/support/downloadtrialThis program was mentioned on this forum: http://w…

Comment by frisian January 2014 permalink
Won't detect GPS on WinCE 5.0/LG LN500
Hello, here is a link for a little programm to check and set GPS settings: http://w5.nuinternet.com/s660100031/SirfTech.htmHere You'll find the programm manual: http://www.mapfactor.com/pn11/

Comment by frisian January 2014 permalink
SplitScreen
Hello, I use the MF PC version if planning a route with an imported gpx-file. When setting enough waypoints on the trackline I get in the end a calculated routeline that is identical. The saved route I can import to my PNA. Regards

Comment by frisian October 2013 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Users name: frisian
Joined: June 2012
Visits: 12
Last Active: July 2022
Roles: Member

MapFactor Forum

frisian

Howdy, Stranger!

About