frisian

OSM versus TomTom maps
On PC You could run the program ITNConverter. The program will show OSM, TomTom Routes, HERE, etc. . I presume the TomTom maps shown in the program are the same then on a mobile device with TomTom

Comment by frisian June 7 permalink
Mistake in navigation - preference of worse road
With a different android mobile app also with maps based on OSM I get the route shown in link one.

Comment by frisian May 10 permalink
Mistake in navigation - preference of worse road
Poland.mca from 15.04.2019 (386.504 kb)Czech-Republik.mca from 22.04.2019 (171.998 kb)

Comment by frisian May 9 permalink
Mistake in navigation - preference of worse road
With the PC-version and OSM I get the route of the first link. So there is may be not a problem with OSM.

Comment by frisian May 9 permalink
Navigator identify's the waypoint/poi-list only as a Tracking/Routing-List
Favorite folders aren't searchable and I have probably scroll a long list with entry's. So IMO it doesn't make much sense too have that much entrys in "Favorite" even if they are organized in seperat folders in the end I hav…

Comment by frisian January 3 permalink
Navigator identify's the waypoint/poi-list only as a Tracking/Routing-List
If I have a list of WPs as GPX file I use Digger to convert it to *mca. The WPs will then shown on the map with name and what ever symbol has been selected. They can then be selected directly in the map as destination or what ever when click on them…

Comment by frisian January 2 permalink
WINCE-Version 18.1.5.1
@ Iman : You should find older Versions as "pnd_app.rar" on Your PC in the system folder C\ "ProgramData"\"Navigator"\"17.1"\"Install". Unzip this file to a new folder "Navigator" on Your…

Comment by frisian October 2018 permalink
WINCE-Version 18.1.5.1
I have to correct myself the WINCE-Version 18.1.7 is running. My vehicle setting from the previous version was the problem. The routing (cheapest) is even better then in the old Version. Great piece of software. Thx. =D>

Comment by frisian October 2018 permalink
WINCE-Version 18.1.5.1
@ Oldie : No The previous Version was running without any problems so I will use it as long the Hardware is functional and the maps are supported. This old PNA is only a backup just in case my Android outdoor smartphone has a problem.

Comment by frisian October 2018 permalink
setup utility 18.1.0
I had no problems. Install of WINCE-Version on local medium and PC-Version was possible. I did'nt do the update of the Setup Utility within the Setup Utility instead download the new version and install it in the folder of the old version.

Comment by frisian October 2018 permalink
Navigator V17 not available
Hello, there are probably folders left (user data etc.) from previous installations. So I would delete them as well and start from scrab again. The next time use something like "Revo uninstaller" to get rid of all folders, registry etc.

Comment by frisian November 2017 permalink
Importing POI using Windows 10 mobile
Hello, I'm not an expert in Windows 10 Mobile. If I had this problem I would simply search the WWW by using the phrase: "access the Windows 10 mobile file system to place a file" and You'll get a lot of pages which address this p…

Comment by frisian August 2017 permalink
New Navigator free version for Windows desktop or mobile PDA/PNA
Hello, I made some screen prints of my PNA but I did not know how to upload them here. One shows the startup screen of Navigator 17.0 on my PNA the second one the Navigator folder on the SD-card. I would try to delete all old Navigator installations…

Comment by frisian July 2017 permalink
New Navigator free version for Windows desktop or mobile PDA/PNA
Hello, I had no problem with downloading the program for WinCE and PPC. In both cases the file version is 17.0.00.1 for the navigator.exe and it showed up on my PNA with Win CE 4.5 NET starting the program Regards

Comment by frisian July 2017 permalink
POI-Konvertierung (.gpx, .csv, .kml) für Mapfactor.
Hallo, ich lade hin und wieder hier: http://poiplaza.com/?p=se POIs herunter im Garmin_GPX-Format weil ich auch ein Garmin nutze. Gastankstellen für D finden sich hier: http://poiplaza.com/index.php?p=sdb&d=2250&lstpg=ds&lsts=92…

Comment by frisian March 2017 permalink
Routing - accuracy?
Hello, enable small local and other roads makes no difference in the route from 9 May 16. But with WP "PE38 0QH" unchecked in the RP-List you'll get a route between the other points. So my way around this problem would be, setting sta…

Comment by frisian July 2016 permalink
MapFactor Navigator WinCE 4.2
Hello, You probably need DLLs that are missing because the manufacters of PNAs are using not a full WinCE OS.This: "There are some missing Dlls on the Viamichelin that you need to install too. Here is the list:coredll.dll, ole32.dll, oleaut32.d…

Comment by frisian August 2015 permalink
Will there be a PC/WINCE Version 15 as free version?
Hello, installation on WinCe 4.2 NET, WinXP, Win7 is running. frisian

Comment by frisian August 2015 permalink
Garmin gdb file
@tomsan84 to my knowledge there is now other way then open the list "routing points " in menu an uncheck there the missed waypoints or click on the waypoint in the map and delete the waypoint in pop up menu displayed. MF has no function &…

Comment by frisian June 2015 permalink
Garmin gdb file
@tomsan Depends probably on the RAM size and processor speed of the phone. On my PNA (WinCE) with 64 MB RAM routes with more than about 200 waypoints are difficult. So I would upload the single gpx file to motoplaner.de, work out the route and than…

Comment by frisian June 2015 permalink
Garmin gdb file
@tomsan84 With ITNConverter I had no problems converting Your gdb to gpx. The file contains 13 day routes and waypoints. So if You are using ITNCon convert every single day route to a gpx. I did it with Day 1 "Almere to Schwedenkai" and a…

Comment by frisian June 2015 permalink
Garmin gdb file
Hello, I just tried "ITNConverter" from here: http://www.benichou-software.com/It can convert all kinds of formats, also gdb to gpx or even to MFs xml so You could use this directly as "routing_points.xml" for routing. I'm …

Comment by frisian June 2015 permalink
Where do I put the mca file of my self generated POIs in PC Navigator 14?
Hello, I store mca-files created with digger in the folder with the maps. In my case: C:\Programme\Navigator14\PC_Navigator\config\map Regards

Comment by frisian May 2015 permalink
Installing Navigator Free on WinCE 5.0 device
Hello, could be also a problem with RAM-size. If all programs installed directly on PNA itself maybe change memory settings in system. I' running MF on WinCE 4.2 NET with 64 MB RAM and installed all my programs on SD. Regards

Comment by frisian May 2015 permalink
Installing Navigator Free on WinCE 5.0 device
Hello, maybe You'll find here : http://xania.123.fr/component/option,com_remository/Itemid,36/func,select/id,2/ the missing DLLs. Regards

Comment by frisian May 2015 permalink
Roundabout "Alte Werft", Papenburg
Hello, this roundabout 53 04 51.1 N, 7 22 42.9 E. Starting point "Rheiderlandstraße", end point "Flachsmeerer Straße" with car and routing option "cheapest" or "shortest". With PC-version I get the same misca…

Comment by frisian November 2014 permalink
Navigator free for Win CE (MIPS) (not ARM version)
Hello, I don't know if this program here: http://sourceforge.net/projects/navegis/?source=navbar or this: http://wiki.navit-project.org/index.php/Main_Page runs on your device. These application using map data from OSM and are also running on …

Comment by frisian November 2014 permalink
add POI category for Toilets
Hello, here: http://poiplaza.com/index.php?p=ds&s=478 you can download POIs catorogy for toilets in all kind of formats and import them.

Comment by frisian October 2014 permalink
Medion GoPal P4410
Hello,here :http://www.gopal-navigator.de/wiki/P_4410 you'll find a description in german for your P4410. There are also described two hardware ways to get on the windows desktop to open then windows explorer.

Comment by frisian October 2014 permalink
Medion GoPal P4410
Hello, maybe here: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=136798 you find a software solution to unlock your desktop. There should be also a hardware solution to open the task bar and then windows explorer. In the end all PNAs are als…

Comment by frisian October 2014 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Users name: frisian
Joined: June 2012
Visits: 0
Last Active: June 7
Roles: Member

MapFactor Forum

frisian

Howdy, Stranger!

About