Navigator Free v.19.3.1 no route calculate on PDA
  • Vote Up0Vote Down RanaToroRanaToro
    Previously used NavigatorFree15 many years. I was happy with that. sufficient, did what it should! Unfortunately, the current osm cards are partially no longer compatible with version 15. Therefore, it makes sense to switch to version 19

    Hardware Typhoon MyGuide 3500 mobile same machine as Mio168

    Installed on the PDA by .cab from storage card, generated by PC Navigator 19 on Win10 machine

    Result: navigator free 19 at the moment will not work!

    Calculate Route...

    Message:

    No Route Available
    Please check your settings for
    disabled toll, charge or truck
    parameters and ensure you
    have all necessary regions
    installed and enabled

    Same problems with other maps e.g. countrys, routing points, settings or profiles / changed profiles.

    On PC Navigator 19 all maps / routing points / profiles / changed profiles works perfect!

    I can't find the failure...immediately navigator.log.txt
  • 13 Comments sorted by
  • Vote Up0Vote Down RanaToroRanaToro
    command line:''
    SYS_HIRES: Not running in highres mode
    IDC file: \Programme\Pocket Navigator 19\atlas_free.idc
    Trying to load \Programme\Pocket Navigator 19\settings.xml
    \Programme\Pocket Navigator 19\settings.xml loaded and initialized
    Settings loaded successfully.
    SYS_DPI: 96,96
    *ADDING FONT RESOURCES*
    *ADDING FONT RESOURCES*
    FAILED TO LOAD UNISCRIBE DLL, USING OLD DRAWING METHOD
    PROFILER: <1> new BarneyApplication() - 0.070 secs
    PROFILER: (TS) BarneyApplication::initBarneyUniverse() START - 1.622 secs
    PROFILER: (TS) BarneyApplication::initBarneyUniverse() splashScreen showed - 1.771 secs
    PROFILER: (TS) BarneyApplication::initBarneyUniverse() localization initialized - 2.244 secs
    Version: v.19.3.1 PDA
    Resolution: 240 x 320
    PROFILER: <2> ResourceContainer::ResourceContainer() - 0.377 secs
    PROFILER: (TS) BarneyApplication::initBarneyUniverse() ResourceContainer COLD initialization - 2.625 secs
    PROFILER: (TS) BarneyApplication::initBarneyUniverse() SoundsPlayer and Events initialized - 2.660 secs
    COMPOSER DUMP BEGIN
    sound_de : data version= 2, data creation=200809171, vendor id=0, license id=0, path='\Storage Card\DATA\sounds_de.mca\', name=MapFactor
    sound_xx_signal : data version= 2, data creation=201001271, vendor id=0, license id=0, path='\Storage Card\DATA\sounds_xx_signal.mca\', name=Signal sounds
    earth_osm : data version=44, data creation=201906200, vendor id=1, license id=0, path='\Storage Card\DATA\earth_osm.mca\'
    germany_osm_east : data version=44, data creation=202004100, vendor id=1, license id=0, path='\Storage Card\DATA\germany_osm_east.mca\'
    germany_osm_north : data version=44, data creation=202004050, vendor id=1, license id=0, path='\Storage Card\DATA\germany_osm_north.mca\'
    germany_osm_south : data version=44, data creation=202004150, vendor id=1, license id=0, path='\Storage Card\DATA\germany_osm_south.mca\'
    germany_osm_west : data version=44, data creation=202004120, vendor id=1, license id=0, path='\Storage Card\DATA\germany_osm_west.mca\'
    import_cameralight : data version=1002, data creation=202003170, vendor id=255, license id=0, path='\Storage Card\DATA\cameralight.mca\'
    import_cameraspeed : data version=1002, data creation=202003160, vendor id=255, license id=0, path='\Storage Card\DATA\cameraspeed.mca\'
    COMPOSER DUMP END
    Tuple::parseValueUnicode - parsing value 'system' in 'system' tuple failed
    PROFILER: <2> BarneyApplication::initSoundsPlayer() - 2.664 secs
    License OK: public key = 'X87UX-GEZUL-xxxxx-xxxxx-xxxxx'
    PROFILER: (TS) loadMapResources: licence check finished - 5.442 secs
    loadMapResources: DataVersion: <44,44>
    PROFILER: <3> DbsConfig::init() FINISH - 4.489 secs
    PROFILER: (TS) loadMapResources: DbsConfig initialised - 10.006 secs
    PROFILER: (TS) loadMapResources: Tie(Base+Driver) initialised - 10.247 secs
    PROFILER: (TS) loadMapResources: signposts initialised - 10.280 secs
    PROFILER: (TS) loadMapResources: lanes info initialised - 10.316 secs
    PROFILER: (TS) loadMapResources: GAPI surface initialised - 10.347 secs
    XPathNode: can not access source file: \Programme\Pocket Navigator 19\default_editor.xml
    XPathNode: can not access source file: \Programme\Pocket Navigator 19\default_editor.xml
    XPathNode: can not access source file: \Programme\Pocket Navigator 19\default_editor.xml
    XPathNode: can not access source file: \Programme\Pocket Navigator 19\default_editor.xml
    PROFILER: (TS) loadMapResources: map view created - 16.251 secs
    PROFILER: (TS) loadMapResources: map view initialised - 17.628 secs
    PROFILER: (TS) loadMapResources: UOM constructed - 17.820 secs
    PROFILER: (TS) loadMapResources: GpsTmcGui constructed - 18.019 secs
    PROFILER: (TS) loadMapResources: AccessorTmcEvent constructed - 18.070 secs
    PROFILER: <3> CarTrackingGui::CarTrackingGui() FINISHED - 0.048 secs
    PROFILER: (TS) loadMapResources: CarTrackingGui constructed - 18.122 secs
    Routing: setVehicleProfile '' type 1.
    PROFILER: <4> RoutingProvider::updateRoutingData - 0.048 secs
    Vehicle profile dump:
    road class 0: closed no, pref 50, speed 130 80
    road class 1: closed no, pref 50, speed 90 50
    road class 2: closed no, pref 50, speed 85 50
    road class 3: closed no, pref 50, speed 80 50
    road class 4: closed no, pref 50, speed 70 50
    road class 5: closed no, pref 50, speed 60 50
    road class 6: closed no, pref 50, speed 60 40
    road class 7: closed yes, pref 50, speed 60 40
    road class 8: closed no, pref 50, speed 40 0
    road class 9: closed no, pref 50, speed 20 0
    road class 10: closed yes, pref 50, speed 40 30
    Routing: setVehicleProfile 'Car' type 1.
    Routing: opened germany_osm_west as 0.
    PROFILER: <4> rtgui::setPoint - 3.441 secs
    Routing: opened germany_osm_east as 1.
    PROFILER: <4> rtgui::setPoint - 2.362 secs
    PROFILER: <4> NavigationGui::loadLinkParams - 0.001 secs
    PROFILER: <3> NavigationGui::NavigationGui() FINISHED - 9.724 secs
    PROFILER: (TS) loadMapResources: NavigationGui constructed - 27.886 secs
    PROFILER: (TS) loadMapResources: remote communication started - 27.888 secs
    PROFILER: <2> loadMapResources: finish - 22.475 secs
    PROFILER: (TS) BarneyApplication::initBarneyUniverse() ResourceContainer HOT initialization - 29.168 secs
    PROFILER: (TS) BarneyApplication::initBarneyUniverse() FINISHED - 29.202 secs
    PROFILER: <1> initBarneyUniverse() - 27.582 secs
    Tuple::parseValueUnicode - parsing value '' in 'none' tuple failed
    Tuple::parseValueUnicode - parsing value '' in 'none' tuple failed
    Routing::memSize() = 4792692 (before)
    Finding route (fastest-transit, car) [route: 2342 13487 42 0.479401 (30877344, 180189968) -> 2339 7499 47 0.561728 (48199904, 189061344)]
    RoutingMultiThreaded: findRoute
    Routing: using prohibited frc (7,10,).
    Routing: limits(250000.0, 60.0, 10000, 1000, 20000).
    PROFILER: <4> DualRouting - step1 - 4.573 secs
    num expanded = 10002 (96601,49435)
    PROFILER: <4> DualRouting - step1 - 2.766 secs
    num expanded = 10001 (125610,0)
    PROFILER: <4> DualRouting - step1 - 2.075 secs
    num expanded = 10001 (0,86186)
    Repository - released 155648, pages 74
    Repository - released 231424, pages 111
    Exception std::exception& e caught: .\src\RtgCore.cpp(397) message:'bad alloc'
    PROFILER: <4> NavigationGui::findRoute - 2.265 secs
    Application quit request
    Exception thrown: .\src\mpfc\PicturePngReader.cpp(209)
    Exception mpfc::exception& ex caught: .\src\Aurora.cpp(306) message:'mapFactor exception: PNG read : can't allocate memory'
    Exception thrown: .\src\mpfc\PicturePngReader.cpp(209)
    Exception mpfc::exception& ex caught: .\src\Aurora.cpp(306) message:'mapFactor exception: PNG read : can't allocate memory'
    MemPool2 - allocated 954 blocks (blocksize 4096, memsize 4194304)
    Application has finished
  • Vote Up0Vote Down PidiePidie
    Did you install the new file "atlas_free.idc" of V19.3.1???
  • Vote Up0Vote Down RanaToroRanaToro
    I think so, its an clean install from the pocket_navigator.cab(19.3.1)
    on the device. Previously cold start...no other apps on this...
  • Vote Up0Vote Down RanaToroRanaToro
    atlas_free.idc is correct

    Does someone work properly with Navigator Free version v.19.3.1 PDA/PNA under Windows Mobile 2003 or WinCE?
  • Vote Up0Vote Down tomastomas
    I am not sure what your devices are, but I think you need WinCE version, not .cab
  • Vote Up0Vote Down RanaToroRanaToro
    No, is an PDA with Windows Mobile 2003 Se
  • Vote Up0Vote Down RanaToroRanaToro
    Windows Mobile 2003 Se = Second Edition
  • Vote Up0Vote Down RanaToroRanaToro
    Does someone work with Navigator Free  v.20 PPC/PDA under Windows Mobile 2003(Se)? Devices like FSC Pocket LOOX, Dell Axim,  Yakumo Delta 300GPS(Mio168) or hp iPAQ's with this OS? It doesn't work here!
    Calculate Route>Message:

    No Route Available
    Please check your settings for
    disabled toll, charge or truck
    parameters and ensure you
    have all necessary regions
    installed and enabled

    On PC Navigator Free 19/20 all maps / routing points / profiles / changed profiles works perfect!
  • Vote Up0Vote Down west2107west2107
    Windows Mobile 6 on HP IPAQ114 has the same problem. The last working version is 17.1.6.1.
  • Vote Up0Vote Down RanaToroRanaToro
    This confirms my experience! Mapfactor Navigator Free from version 18.x does not run properly under Windows 2003 and WM5! Apparently the hardware is already too uninteresting?! Or are only Android users interesting?! Maybe the board admin can pass this on to the developers.
  • Vote Up0Vote Down RanaToroRanaToro
    Move up this! make v20 work on Windows Mobile 2003 and higher;-)
  • Vote Up0Vote Down OldieOldie
    I would prefer, that they concentrate their efforts on living OSs rather than on more or less dead ones.
  • Vote Up0Vote Down RanaToroRanaToro
    LoL...mapfactor still offer the navigator v20(not only the free one) as runnable on these more or less dead OSs, but will not work!
Add a Comment

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Apply for Membership

Categories

In this Discussion