PrzemekSupak

Constantly says to take sliproad off of highway just to go back on the highway
@shlublu I don't know why, but my routing is correct, via actual A13. Please set my preferences, from earlier posts, and check it. IMHO standard 50% works fine with professional, paid maps. (edit) I'm sure preferences and max speed can so…

Comment by PrzemekSupak June 2015 permalink
Constantly says to take sliproad off of highway just to go back on the highway
@tvoEverythink is correct - the first issue - without links, the second - with additional (checked again coordinates!) waypoint, stay on main motorway leave and back motorway. @shlubluIt is difficult to check all A6, maybe small hint please.

Comment by PrzemekSupak June 2015 permalink
Constantly says to take sliproad off of highway just to go back on the highway
@DaveIt would be easier, if You could show us start and destination.I can check, if it is possible to set better preferences or other parameters.Sometimes issue is with map, settings or routing. @GabrielMoiseI checked it once again.With paid road (…

Comment by PrzemekSupak June 2015 permalink
Constantly says to take sliproad off of highway just to go back on the highway
@GabrielMoise I think You like this, showed above, road. Look at OSM map, there is new part of road in Bulgaria, number 5. Maybe now this road is faster - from Bucuresti, south number 5 via Bulgaria, than motorway in Greece. I propose You check it! …

Comment by PrzemekSupak June 2015 permalink
Constantly says to take sliproad off of highway just to go back on the highway
Reffering to this 'crazy' routing.Yes, this is the key. Destination point is on toll road, with paid road disabled, and routing try avoid this paid road as much as possible.

Comment by PrzemekSupak May 2015 permalink
Constantly says to take sliproad off of highway just to go back on the highway
Higher preference of motorway should help to stay on highway road (for crcook84). The next case - try disable charge and toll roads. I add some screenshots soon.

Comment by PrzemekSupak May 2015 permalink
Constantly says to take sliproad off of highway just to go back on the highway
Change motorway preferences to 69 and check result. Almost the same issue with motorway exit. From 51:2:42,72 16:58:14,592 Via 51:2:53,8 16:58:18 To 51:2:42,612 16:58:55,344 It seems to be fine, but without 'via' routing looks like Disne…

Comment by PrzemekSupak May 2015 permalink
Missing DE translation in intinerary
Add to file tts navigation.xml, in 'de' language: sliproad_now A-SL-00-00 %EXIT_NAME and delete dot in tts.xml, A-SL-00-00, at the end of the sentence.The same is in 'pl' language. (btw)'-1'…

Comment by PrzemekSupak May 2015 permalink
Test of Android version 1.6.x
File navigation, language cs (Czech), 'sliproad_later', with tts, must be described as 'manoeuvre_tts' (now is manoeuvre). -language 'de' and 'pl'. For tts 'sliproad_later' must be added (for both):…

Comment by PrzemekSupak May 2015 permalink
Missing DE translation in intinerary
It is really worth consider. Voice still the same, without changes, unit also. Look at example: 100 km and 100 m. Only one letter difference. Better visible and more contrast is simple 100. 100 km or 100 m vs. 100 km or 100 Just additional one thou…

Comment by PrzemekSupak May 2015 permalink
Missing DE translation in intinerary
Additional word about this space - maybe for short distance unit is no needed (10 km, 1 km, but simply 500, 300, 100). (edit) Ver.1.6.14 has this space!

Comment by PrzemekSupak May 2015 permalink
Speed sign in maps when not navigating
Silent mode with warning active: Install SoundAbout tts, from Google store and change in Android - Setting ... TTS voice to SoundAbout TTS. Works with speedcameras warning, hope also with speed limit warnings.

Comment by PrzemekSupak May 2015 permalink
Less announcements during navigation
...I don't know... 'standard_now' is obvious, Problem, issue is with 'standard_later'. How to delete 2000, 1000, 500, maybe 400 and leave 300, 200, 100. If You delete Tts-direction..., You will not hear street name. If You d…

Comment by PrzemekSupak May 2015 permalink
Less announcements during navigation
... Better not, because 1000m before You can hear turn....

Comment by PrzemekSupak May 2015 permalink
Less announcements during navigation
Yes, but this is the only way do not hear in 1000, in 500 ..., but shorter 'soon', isn't it.

Comment by PrzemekSupak May 2015 permalink
Less announcements during navigation
No problem, 1. For speedcameras, look at menu - preferences, and disable 1000m. 2. Be carefull with next point, make backup copy of files tts.xml and navigation.xml (folder navigator). 3. Do not change too much, it is important e.g. remember about …

Comment by PrzemekSupak May 2015 permalink
New Routing Mode -- EASY mode --
Try my preferences:Change in setup, for a while, to metric (km/h).Add new car, fastest, max speed 110 (km/h).140/90/63% for motorways,100/70/6390/50/6385/50/6380/50/5375/50/5370/40/5065/40/50 for small local roads. Routing goes always A605/A1 or, fo…

Comment by PrzemekSupak May 2015 permalink
New Routing Mode -- EASY mode --
Could You please show it on map. The most possible reason is issue with map. Try set 70 % for motorways, primary, secondary roads and enable small local roads.

Comment by PrzemekSupak May 2015 permalink
New Routing Mode -- EASY mode --
Please wait for comment from Mapfactor team, or check it in previous posts.WindowsCE has settings.xml and del it helps with preferences issues. As far as I remember, answer is 'yes'. (edit)Check 'Restore initial settings of Navigator&…

Comment by PrzemekSupak May 2015 permalink
New Routing Mode -- EASY mode --
Try delete settings.xml file.

Comment by PrzemekSupak May 2015 permalink
Altitude options for navigating
Maybe it is possible to change world map to altitude coloured geographical map.

Comment by PrzemekSupak May 2015 permalink
Delete voice announcements waypoints
I checked it for You and it works, but I think that too many added '-' and Navigator stop working.It is better to delete two lanes, from three, with additional '-' ( file>Fy--..... and file>Fz--....). It is now: fi…

Comment by PrzemekSupak May 2015 permalink
Delete voice announcements waypoints
Impossible! Try reboot your navigation and/or turn on synthetised voice (tts). In navigation change language and voice to french. (edit) There are three manoeuvre: 'waypoint', 'waypoint reached', 'waypoint missed'.

Comment by PrzemekSupak May 2015 permalink
Delete voice announcements waypoints
Fx-WP-00-01 change to Fx--Wp-00-01.The same with all other waypoints. (edit)If there are no 'waypoint...' in Your language section, change it in section "any_other".

Comment by PrzemekSupak May 2015 permalink
Delete voice announcements waypoints
It is good direction. Look at this lane: 'A--OT-02-00' one '-' more is enought. Do the same with Your waypoints (Fx, Fy, Fz are parts of sentence).

Comment by PrzemekSupak May 2015 permalink
Alternative Routes
Additional waypoints or new cars with different road preferences.

Comment by PrzemekSupak May 2015 permalink
Delete voice announcements waypoints
I hope....

Comment by PrzemekSupak May 2015 permalink
Delete voice announcements waypoints
Yes, look at files navigation and tts.

Comment by PrzemekSupak May 2015 permalink
routing problem - motorway vs motorway_link
I checked it once again and everything seems to be fine. With my preferences road/routing goes through main lanes (motorway). I still think that this separate lane of motorway is not link - it is just comfort additional lane for thous, who want to u…

Comment by PrzemekSupak May 2015 permalink
(Edited) Change overspeed and speed/red light camera warnings to tts; Make items translatable
1. I have standard beep. It is short, the only such sound and used too often, especially in the towns. 2. I agree and I have my own wav, synthetised sound file, but voice is slight different - just the other person. Sometimes this two girls talk to …

Comment by PrzemekSupak May 2015 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Users name: PrzemekSupak
Joined: August 2013
Visits: 334
Last Active: August 26
Roles: Member

MapFactor Forum

PrzemekSupak

Howdy, Stranger!

About