mdx

Update from 10 > 11
p.s. some paths were fixed in atlas_free.idc in build 11.0.10 ... sorry I did not realized what was the problem

Comment by mdx June 2011 permalink
Changelog ?
update PND 11.0.9 -> 11.0.10: - fixed paths for settings, favorites, etc. (see http://forum.mapfactor.com/discussion/2/how-to-install-navigatorfree-on-pnd-device/#Item_12)

Comment by mdx June 2011 permalink
How to install NavigatorFREE on PND device
fixed into PND version 11.0.10 (should be on update after SYNC)

Comment by mdx June 2011 permalink
How to install NavigatorFREE on PND device
by default PND version stores settings and favorites next to executable. Isn't your card write protected (I know, silly question)? Does not your device actually copy SD card into internal memory (for faster startup) and then it is in reality st…

Comment by mdx June 2011 permalink
Problems with ferries
Yes, what I meant is that if "country" is defined by multipolygon (many polygons with potential holes) and the ferry does not cross boundary of that multipolygon it should work. Sicily is separate polygon. It could be solved, but at the mo…

Comment by mdx June 2011 permalink
Changelog ?
Hi star, there is no public changelog available at the moment. I understand that the updates of ver11 are currently "too frequent". update 11.0.8 -> 11.0.9 - PDA/PND - fixed missing GoTo Coordinate (WGS84) - keeping routing cache for fa…

Comment by mdx June 2011 permalink
Running Navigator Free on Win CE .Net 4.2 Core
If it already started (splash screen) then the set of DLL is complete ... but probably not suitable for your system (?). Which one did you add at the end?

Comment by mdx June 2011 permalink
Running Navigator Free on Win CE .Net 4.2 Core
I would guess that you probably have zlib.dll there, and what is probably missing is WININET.dll used for internet search etc. I am not sure if there is any dummy WININET.dll available on the net.

Comment by mdx June 2011 permalink
Streets not found
"After close the application at my Touch2 the NavigatorFree Start screen pops up and keeps open until I push the screen again." ... that's "advertisement feature", so it is expected.

Comment by mdx June 2011 permalink
Installed on SD Card - Win CE 5 - Error
It should not be that old - it should work even on 4.2 ... The problem is related probably to missing DLLs - please check discussion http://forum.mapfactor.com/discussion/comment/65/#Comment_65 it could help Martin

Comment by mdx June 2011 permalink
Streets not found
Ops, can you be more specific? Country, text? (or even better navigator.log.txt if there is some error or warning). I do not understand crashed & can't step back ... so the application was not terminated? thanks Martin

Comment by mdx June 2011 permalink
V11 crashes
only small progress info about California computation - the text box for route numbers overflow, and it was caused by "road numbers" like +----------+---------------------------------------------------+ | id_osm | route_number …

Comment by mdx June 2011 permalink
POI Import
Hi Chris, I noticed your question in http://forum.mapfactor.com/discussion/7/how-to-import-my-poi-points-of-interest-to-navigator-free/#Item_5 and believe me that ASAP I will have digger for version 11 I will post a link. It is taking loner (as usua…

Comment by mdx June 2011 permalink
Streets not found
@Wolfi2000 If you download Germany map for version 11, the postcode areas should be a little bit better (new process handling properly polygon geometry). It still assigns street to one postcode only based on the first coordinate of the street - not…

Comment by mdx June 2011 permalink
V11 crashes
well, Mexico fixed, but there was also a problem in conversion usa_california_osm (network was too huge for given region). New data (June) should be computed tomorrow (?) - in the worst case we will have to split it in two parts. thanks Martin

Comment by mdx June 2011 permalink
V11 crashes
p.s. I do not know if it is good news or bad news - it crashed on my machine now too, and it was caused by not properly converted DMP 2011/06/20 15:08:17 mexico_osm : data version=41, data creation=201106120, ... it is close to …

Comment by mdx June 2011 permalink
Street number
Do you mean house number, i.e. number of the house on the street? If they are available in tag addr:housenumber and the addr:street is filled and it matches to nearby street you should see some. Can you give me name of street where is the problem? D…

Comment by mdx June 2011 permalink
V11 crashes
are all data "data version=41"? In particular earth_osm (that is the MCA you see in higher zoom). Any special settings? Disabled roads?

Comment by mdx June 2011 permalink
V11 crashes
can you have a look at navigator.log.txt? Could it be problem that the maps are from version 10?

Comment by mdx June 2011 permalink
TMC support
One more note: you also need radio station with _free_ TMC (not encrypted/commercial). That is not a problem in Czech Republic, but would be in France. In many countries you can get both free as well as commercial TMC.

Comment by mdx June 2011 permalink
TMC support
Hello, do you have device providing TMC information (like GPS with TMC)? Note, that TMC locations in OpenStreetMap source are available only in Germany, so free version will work only there. regards Martin p.s. configuration is similar to v…

Comment by mdx June 2011 permalink
The import files do not work from version 10 to version 11
new digger will be hopefully available soon (it is not at the moment) - see discussion http://forum.mapfactor.com/discussion/7/how-to-import-my-poi-points-of-interest-to-navigator-free/

Comment by mdx June 2011 permalink
POI
You should see them in search/Favourites/Imports

Comment by mdx June 2011 permalink
Internet Search
if you have internet connectivity it should work as it is, no need for setup regards Martin

Comment by mdx June 2011 permalink
version 11
ok, sorry, e-shop with version 11 is not updated yet. Just wrote a note with your order that you would like version 11. thanks for your comment Martin

Comment by mdx June 2011 permalink
version 11
You can order it from e-shop (shortcut link is from Setup Utility "Purchase commercial key") thanks Martin

Comment by mdx June 2011 permalink
Delete a route
Menu/Route/Routing points/Delete All

Comment by mdx June 2011 permalink
Streets not found
Well, it is not necessarily bug in Navigator. The problem is the binding of streets to city/administrative area/center of settlement. Navigator is primarily using administrative area, which is unfortunately not always available in OSM data. For that…

Comment by mdx June 2011 permalink
update to 11.0.2 wipes off all favorites
Do you mean departure, waypoints and destination? That's not automatically imported, but you can copy it. The file is named "routing_points.xml". regards Martin

Comment by mdx June 2011 permalink
Update from 10 > 11
yes, that was another problem, fixed yesterday - please update to 11.0.6, thanks

Comment by mdx June 2011 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Users name: mdx
Joined: October 2010
Visits: 329
Last Active: February 2016
Roles: Member, Administrator

MapFactor Forum

mdx

Howdy, Stranger!

About