crocodilefarm

GPS signal lost/reaquired
Then it would be nice, if in one of the next versions it could be integrated so that we can switch those options. And if it is just in the settings.xml for manually changing, that would be okay (at least for me).

Comment by crocodilefarm May 2015 permalink
setting of waypoints
To create a waypoint you have to click on a street, from the menu click the flag. That will creat a waypoint. But it is not possible to hide the flag on the map. It will always be there on the map as long as your route is active.

Comment by crocodilefarm April 2015 permalink
navigator stops navigating when screen is off and power plug is disconnected
Do you have the energy-saving-mode activated? I had that too, when it was activated. After inactivating, it worked (at least for me).

Comment by crocodilefarm March 2015 permalink
How to import my POI (Points of Interest) to Navigator FREE
Do you also have an installed Version of the Navigator Setup Utility or PC Navigator (look above)? I tried with your (one) data to generate a mca-file. (Linuxmint 17.1 & wine) I had no probem. So, I've no idea. Sorry.

Comment by crocodilefarm March 2015 permalink
Test of Android version 1.5.x
On my Nexus 7 (2013) with deactivated GA there is no crash with 1.6.3. Didn't try it with activated GA.

Comment by crocodilefarm March 2015 permalink
Test of Android version 1.5.x
Well, my Nexus 7 is the 2013 Version, with 1920x1080 screen. And what @hvdwolf wrote, an option to en/disable antialiasing could be a good thing.

Comment by crocodilefarm March 2015 permalink
Test of Android version 1.5.x
I've got a Google Nexus 7 (Android 5.0.2). If wanted, I could also test an alpha version on my device.

Comment by crocodilefarm March 2015 permalink
importing OSM files
No, MapFactor uses an own format to generate maps. So there is no way to use foreign maps.

Comment by crocodilefarm March 2015 permalink
Hello, I am French..! I would like to prepare a trip
Believe me, I tried that more than once, it doesn't work, but this here is really OT, so let's stopp it. ;-)

Comment by crocodilefarm March 2015 permalink
Hello, I am French..! I would like to prepare a trip
Okay, thx, but I'm already using Firefox. And "copy" wasn't the Problem, but to "paste" into the textarea doesn't work.

Comment by crocodilefarm March 2015 permalink
Hello, I am French..! I would like to prepare a trip
My Google Nexus 7 doesn't copy it either, so I had to enter it letter by letter...

Comment by crocodilefarm March 2015 permalink
Hello, I am French..! I would like to prepare a trip
Ici: http://www.mapfactor.com/pn12/manuals/fr/Navigator.pdf

Comment by crocodilefarm March 2015 permalink
Map downloads
For e. g. in the area between Sens and Montargis, there are lots of "holes". Mostly mainroads. Many little or small roads are missing. So, France isn't almost at 100%

Comment by crocodilefarm March 2015 permalink
Map downloads
Well, in France there are in the country-side quiet many missing streets. So, in OSM is quiet still a lot to do in France.

Comment by crocodilefarm February 2015 permalink
German users: please test
@chattiewoman Sind Deine Links noch aktuell? (Are your links still actual?)

Comment by crocodilefarm February 2015 permalink
Mapfactor not responding to any buttons
Search for the folder Navigator. It should be in the same stage as the folder Android. Than browse to folder data. You should find your maps there.

Comment by crocodilefarm February 2015 permalink
GPX import/export
gpx is only supported in Android-version. In Win with NavigatorFree and on WinCE-Version you can just use nmea. You have to convert your gpx-files with Digger into mca-files to show your route on the maps.

Comment by crocodilefarm February 2015 permalink
Display Roundabout exit number
By the way, roundabout exit numbers are allready implemented in PC Navigator and in WinCE-version

Comment by crocodilefarm February 2015 permalink
Navigator Free POI Search
Well, the search function in PC Navigator really doesn't give anything to Perth Australia, when searching by adress and name. I think, the search engine is not as new as the engine from the android-version. A search here gives you a lot of info…

Comment by crocodilefarm February 2015 permalink
How to import my POI (Points of Interest) to Navigator FREE
Okay, that you don't reach my screenshot, I can confirm. While I was using Linuxmint 13 (now it ist 17), I also didn't reach that screen. But now with the nes Linuxmint, it works fine. But that it doesn't run under WinXP, that's…

Comment by crocodilefarm February 2015 permalink
How to import my POI (Points of Interest) to Navigator FREE
When you're using "icons" and reach this window did you change the test-image into another? You can use *.png or *.gif, other types also should work. A good size is between 32x32 and 64x64. But you can play with the sizes and try to …

Comment by crocodilefarm January 2015 permalink
"Tiny" River near Mokpo-South Korea
Du kommst aber weit rum... ;-)

Comment by crocodilefarm January 2015 permalink
route not found
Usually a route cannot be calculated, when departure or destination is not accessible for the selected vehicle-type. Try to use pedestrian. If routing is possible, then may be the new maps have been changed for the streets because of new accessing-r…

Comment by crocodilefarm January 2015 permalink
digger_12_1_5 convert to .mca file don't work?
Hi treta, sounds good, and don't forget, UTF8 doesn't support letters like ç,â,ã,é,è. I think, that's also why you couldn't see anything.

Comment by crocodilefarm January 2015 permalink
digger_12_1_5 convert to .mca file don't work?
Hello treta, I've send you some files to your adress, let me know, if that helps you.

Comment by crocodilefarm January 2015 permalink
digger_12_1_5 convert to .mca file don't work?
Okay, sharing a file in this forum doesn't work. Perhaps per mail. Well, that you only see 9 instead of 10 records is, that you don't have a headline like lon,lat,name So the first line is used for that. I tried to build a mca file with…

Comment by crocodilefarm January 2015 permalink
digger_12_1_5 convert to .mca file don't work?
Is it possible, that you share at least a little part of your source file? So I could try to build a mca-file with your data, to see, if your error appears to me too. At this moment it is strange, that you can't build yours. To your digger.lo…

Comment by crocodilefarm January 2015 permalink
digger_12_1_5 convert to .mca file don't work?
Have you checked the "Lat" and "Lon" Numbers? Perhaps they are swapped? I've had that once and my POIs where found anywhere in Africa... Check the Zoom-Level for the Points, set them to the highest value and let them show y…

Comment by crocodilefarm January 2015 permalink
save screen space - allow swipe to access main menu instead of taking up lots of space
@lubos - I've got Android 4.4.4 on my Nexus 7 Tablet. how can I hide those three buttons? They keep on the screen the whole time NavigatorFree is running. Any setting required or is there just the technical possibility for you to add this fun…

Comment by crocodilefarm January 2015 permalink
save screen space - allow swipe to access main menu instead of taking up lots of space
Does the menu-button's position depends on the Android-Version? On my Nexus 7 with KitKat 4.4.4 the menu-button is located (like Roldorf's) at the top right corner of the screen.

Comment by crocodilefarm January 2015 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Users name: crocodilefarm
Joined: June 2012
Visits: 520
Last Active: November 2021
Roles: Member

MapFactor Forum

crocodilefarm

Howdy, Stranger!

About